The Seamwork Jill Coatigan with striped lining

Sometimes you see a new pattern and in your head, it immediately links to this particular fabric you have in your collection. You simply have to make it. The project jumps to the pole position of your sewing queue. This happened when I saw the Jill Coatigan in the December Issue of Seamwork Magazine. It matched perfectly with this fuzzy charcoal knit I had in my collection. I just had to sew one immediately!Seamwork Jill Coatigan

The Seamwork Jill Coatigan pattern

There are 5 pieces in this pattern, which is not much for an outerwear garment. Nevertheless, I printed the A0-format of the pattern at the copy shop. The pieces for a coat are always large, aren’t they? I was not going to tape them together. Based on the finished measurements I cut out a straight L, and did not make any alterations. The fit is perfect!

 

The fabric

I bought this fuzzy charcoal jersey at the Neuköllener Stoff in November 2016. When I saw it at the market I had something ‘coat-ish’ in mind for it.
Then happened what usually happens when I combine a new pattern with a piece of fabric I have in my collection: ‘I don’t have enough’! I only had 2 meters and the charts asked for 3,6 meters. So I pulled out all the tricks I have to get the Jill coatigan out of this piece of fabric because now I had this picture in my mind and no other fabric would do. Luckily the fabric is very forgiving so I could place some pieces in different directions. Further, I omitted the vent and placed the center back at the fold line. To make the Tetris work I also had to cut the facing in two parts. Due to the fuzziness of the fabric, you don’t see this at all.

Teamwork Jill Coatigan
No vent at the back.
The striped lining

In Belgium, winters can be cold and windy. Although the fabric is a rather heavy jersey it needs a lining to make it a warm coat. I remembered I had a pin on my Pinterest from a self-made black & white lining that I wanted to make myself for a long time. This would be perfect for this coat and not difficult to make. I cut several strips of 24 cm and sewed them together. For the sleeves, I used the plain black lining.
To cut the lining I used the depth of the vent for the back pleat. This pleat is necessary to be able to move when the lining is sewed in. On the front pattern piece, I outlined the edge of the facing, cut it out and used the rest as front pattern lining piece. Further, I put an extra 3 cm seam allowance on the bottom of the coat and sleeve pieces. This to give more free movement when wearing the coat.

Seamwork Jill Coatigan
The front piece of the lining.
The sewing process

Sewing the Jill Coatigan is easy. It could also have been a quick project but I took my time with some parts. I hand-sewed the pockets on the front because I don’t like a topstitched seam on this fuzzy fabric.

Seamwork Jill Coatigan
Hand-sewing the pockets.

That’s also the reason why I didn’t make buttonholes. I sewed black fold-over elastic in two and stitched the loops between the front and the front facing. To make it a wearable coat for me—I have to be able to wear it on my bike—it needed a closure. I found the two giant grey buttons in the bargain box at my local haberdashery store.

Further, making the lining and sewing the lining also took some time. I sewed the lining in with the machine and hand-sewed the seam. Through the whole process, I never came up against any obstacles. The instructions are clear and it was a joy to sew.

The black pleat in the lining gives you free movement.
Conclusion

I love my Jill Coatigan. Although with the lining and the buttons it is more a coat than a coatigan. I’ve been wearing it for more than a month now and it is perfect for the colder and windy weather. Also, the closure works perfectly when I am cycling. Another bonus is the pockets. They are perfect for putting in my gloves and keys. So, me and my Jill Coat are very good friends.

Seamwork Jill Coatigan
The Jill Coat paired with the original 1952 J.R. Bauman dress form I received from my sister-in-law, Linde Ergo.

3 thoughts on “The Seamwork Jill Coatigan with striped lining

  1. Gosh. this is so lovely Wis. Immediately I’m drawn to the fuzzy texture of the fabric as I love soft fabrics and the shape of your finished coat really suits you. Love that lining too!

  2. Hello! I just made the Jill coatigan and would love to line it but I have never done it before and I’m scared! How did you determine the size of the pleat for ease at the back? Any tips? Thank youuu!!! Bedankt!

    1. Hi Anne-Kathryn
      For this lining, I took the width of the vent for the width of the pleat. Normally you take 2cm for the pleat. That would give you enough ease.
      Good luck with it!
      Wis x

Leave a Reply

Your email address will not be published. Required fields are marked *